A wide range of traffic control equipment available for rent or purchase.
Arrow Boards
DIMENSIONS
Arrow panel: 48" x 96"
Length (frame): 111"
Trailer width, including fenders: 83"
Overall sign width: 96"
Height to bottom of sign when raised: 84"
Overall height:
Sign raised: 132"
Sign lowered: 89"
Total weight: 1250 Ibs. (567kg)
FEATURES
• High-output amber LEDs
• Selection of arrow and other display patterns
• Heavy-duty hand-winch with safety brake allows one person to raise board
• Single locking device holds arrow board in place while operating and during transport
• Controller located safely away from traffic
• Weather-resistant control box cover has lockable slam-latch
• Arrow display has automatic dimming
• Stabilizer legs raise tires off the ground to provide stability in high wind
• Meets MUTCD 2.2. Power system
• Energy-efficient operation results in long run times
• Controller has re-settable fuses
• Visibility at least 1 mile
•15- light model provides up to 7 arrow display functions
Battery voltage: 12 Vdc
Battery capacity: 36 Ah total
Number of batteries: Two
Solar charging: One solar panel
Solar panel regulation: 50 W
Battery: Leak- and spill-proof valve-regulated lead acid (VRLA)
POWER
•50-watt Solar Panel
• Solar charging system features solid state voltage regulator with charge indicator
• Solar panels charge batteries automatically without intervention
SOLAR PANELS
Arrow Board
Barricades
Type I And II Barricade
-
All plastic and maintenance free, never rusts, needs painting, or leg straightening
-
Molded hollow so it can be internally ballasted with up to 10 lbs of dry sand
-
Molded handles with mounting holes for attaching flashing lights
-
Features "click lock" hinges for a positive interlock in the open position
-
Sandbag bar (if additional weight is required)
-
Stacking lugs keep stacked units from sliding
-
Names can be stenciled on the barricade for identification
-
NCHRP-350 accepted, meets MUTCH standards
Item# 290493, Type I and II 25" x 45" - 16 lbs.
Type III Barricade
-
High density polyethylene material resists fading, chipping, or splintering
-
Flat surface displays retro reflective sheeting, complies with MUTCD requirements
-
Hollow core extruded design
-
Internal walls provide lightweight strength and durability
-
Can be used in various generic Type III Barricade designs
-
Complies with NCHRP-350 under WZ-85
Item# 290495, Type III Barricade Replacement Plastic Boards 1" x 8"
Channelizer Drums and Bases
Meets MUTCD & NCHRP 350 requirements. Sheeting configurations meet all state specifications.
-
Rounded Ergonomic Handle for easy access with a comfortable grip
-
Multiple-Base Compatibility fits most bases in your inventory - Call to Order*
-
Recessed Reflective Band Tiers for long-lasting protection of sheeting
-
Four 5" Wide Anti-Rotation Claws will keep drums facing traffic
-
Built-In Sheeting Edge Protector guards against wear during stacking
-
Five-Tier Design for better visibility in heavy traffic
-
Built-in 10" Wide Anti-Roll Bottom resists roll after impact
-
Double Light Mounts on handle for added convenience
-
Domed Top sheds debris and water
-
Ribbed Bottom Lip for easy base attachment
-
Two-Piece Top & Base Design allows dragging without base & drum separation
-
Two-Piece Breakaway Feature allows controlled separation on impact
-
UV Stabilized Bright Orange Polyethylene protects from sun damage
Item# 8045, B500/LC Traffic Drum with 4x6" Diamond Grade Sheeting
Drum
Channelizer Drums
-
Slide on rubber weighted base
-
Grid pattern on the bottom of our rubber bases- hugs tightly to the road
-
Rudder bases are made from recycled rubber
Item# 5650, 22lbs Tire Ring Base
Tire Ring Base
Bases
Cones and Accessories
Meets MUTCD & NCHRP 350 requirements. Sheeting configurations meet all state specifications.
-
Provides brilliant reflectivity and maximum durability
-
Meets all requirements of the MUTCD
-
Reflective collars manufactured by 3M and Reflexive
Item# 2706, 28" Recessed Collar Cone with 6" & 4" Reflective Collars
Cone
Standard Traffic Cone
-
Maximum visibility
-
Five-tier design
-
Multi-purpose handle
-
Efficient stacking
-
Easy transport
-
Secure base
-
Fracture-Resistant handle
-
Locking Base
-
Mount for lights, sign, vertical panels
Item# 2688, Channelizer 4x6" Diamond Grade C-42
Item# 2673, 6LB Rubber Base CB-16
Channelizer Cone & Base
Channelizer Cone
Warning Flags
Sizes 18" and 24" mesh and solid vinyl flags, blaze orange color or red, are available with or without 3/4" round wood staffs. Mesh flags have cloth binding.
Item# 1036-24, 24" Vinyl, 36" Wood-Orange Flag
Item# 1036-24M, 24" Mesh, 36" Wood- Orange Flag
Item# 2036-24, 24" Vinyl, 36" Wood- Red Flag
Item# 2036-24S, 24" Vinyl w/Stay, 36" Wood- Red Flag
Warning Flags
Solid Vinyl Waring Flag
Weave Mesh Warning Flag
Safety Accessories
Public Safety Vest
Public Safety Vests meeting ANSI/ISEA 207-2006 standards are specially designed to provide unrestricted access to equipment, weapons, and medical devices that may be worn at the waist.
-
Constructed of comfortable mesh polyester material.
-
Five point tear away at the shoulders, sides and front.
-
Reflective stripes provide 360 degree visibility.
-
Short in front design allows access to equipment belt.
-
Adjustable side straps for custom fit.
-
Constructed of at least 450 square inches of back ground material and 201 square inches of retro reflective tape.
-
Expandable radio pocket and pencil pocket.
-
Tabs for mic or phone over upper chest on both sides.
-
Provision for reflective I.D. panel on back.
-
Plastic pocket for slide-in I.D. panel on front and back.
Item# V770, Mesh Polyester and Reflective Stripes- Green Trim
Message Boards
-
Easiest programming in the industry
-
On board controller, no laptop required
-
Full-color touchscreen controller with high-resolution display
-
Multiple alphanumeric fonts make message clear and legible
-
Low power consumption and more up time
-
360-degree display rotation for optimal positioning
-
Standard tow hitch and removable draw-bar
-
Durable powder-coat finish
-
Under 3000 pounds, can be towed by most vehicles
-
Standard 2-inch ball coupler tow-hitch
-
Removable draw bar for shipping and for added theft protection
-
Hydraulic lift allows one person to easily raise and lower the message board
-
Tower rotates 360 degrees for optimal positioning
-
Meets MUTCD and NTCIP compliant
-
Single disc brake holds board in place during operation, while a cradle supports and holds board in travel position
FEATURES
POWER
-
Two - 4D AGM sealed batteries
-
15 AMP on board charger
-
170 Solar watts
-
Energy-efficient operation results in long run times
-
Solar panels charge batteries automatically without intervention
-
Charging system shuts down when batteries are fully charged, preventing damage
-
Unique system allows battery charging with solar panels or commercial power
-
Cooling fan protects battery charger from overheating
-
Control box can be locked to prevent unauthorized access
Resolution: Four amber LEDs form each pixel
Matrix: 48 pixels wide, 27 pixels high
Fonts: 12 fonts
Default font:
Smallest characters: 4 lines of 9 characters
Largest characters: 1 line of 4 characters
DISPLAY
3 lines of 8 characters per line, max.
5x7 pixels per character
Message Board
Light Towers
Light Towers
-
Manual, electric, and hydraulic tower configurations available for your specific applications
-
SHO parallel lamp fixtures provide up to 50% more lumens than competitive light fixtures
-
50 gallon fuel capacity provides up to 100 hours run time without refueling
Light Tower
Signs and Stands
Reflective Signs
-
Offers increased angularity for enhanced nighttime performance
-
Features vinyl-coated nylon pocket design
-
Lexan pockets available upon request at additional cost
-
Available in 48" X 48"
Item# RUR48MAR-SO, Lane Shift Ahead
Item# RUR48MAR-SO, Merge Left Symbol
Item# RUR48MAR-SO, Merge Right Symbol
Item# RUR48MAR-SO, Flagger Ahead Symbol
Item# RUR48MAR-SO, Utility Worker Ahead
Item# RUR48MAR-SO, One Lane Road Ahead
Item# RUR48MAR-SO, Shoulder Closed
Item# RUR48DG-SO, Lane Shift Ahead
Item# RUR48DG-SO, Merge Left Symbol
Item# RUR48DG-SO, Merge Right Symbol
Item# RUR48DG-SO, Flagger Ahead Symbol
Item# RUR48DG-SO, Utility Worker Ahead
Item# RUR48DG-SO, One Lane Road Ahead
Item# RUR48DG-SO, Shoulder Closed
Marathon Grade
Diamond Grade
Rigid Sign
Roll Up Sign
-
TwinFlex™ features a two stage telescopic aluminum mast which allows roll-up and/or rigid signs to be displayed 14" to 84" off the ground (depending on model selected, see chart below).
-
Triple flagholder for 3/4" round flag staffs factory installed.
-
Foot operated leg releases quickly lock legs in one of three positions to allow for storage or deployment on uneven terrain.
-
Aluminum leg models feature .100" wall aircraft quality tubing, 16 ga. steel leg models have an orange powder coat finish.
-
All fiberglass ribs are coated with a "polyester veil coating" that reduces splinters and cracking
-
Available for 36" and 48" roll-up signs
-
Hardware included
Item# ES60- 5" Roll-Up Stand
Item# SDL1008- 36"-48" Roll-Up Bracket
Item# RR30048-Ribsets 3/16
Signs and Stands
Truck Mounted Attenuators
Truck Mounted Attenuator
-
Available for Rental Only
-
Units include flashing arrow board securely mounted to the truck bed
-
Low profile and open design is beneficial in minimizing wind resistance and drag
-
Folds 90-degree position for travel and storage for easy transit in the upright position (approximately 12ft long)
-
Rear strut is raised 10- degrees for added mobility and ground clearance
-
180 degree angle for high speed travel and storage over the truck bed (approximately 10ft. 6” long)
-
Please call your local SPS Branch for assistance for scheduling the delivery and set-up.